Skip to content
I am

Perrysburg, OH · about 20 min · 15 mi to the shop

Truck repair for Perrysburg: 13 miles straight up I-75 from the Turnpike to an open bay

Heavy-duty truck and trailer repair for Perrysburg, Rossford and the Turnpike interchange, about 15 miles from the shop.

Exits

  • I-75 193 US-20 / US-23 South, Perrysburg / Fremont · Downtown Perrysburg's exit. I-75 north from here to exit 207 is about 13 miles.
  • I-75 192 I-475 / US-23 North, Maumee / Ann Arbor · The south end of I-475. For the shop, stay on I-75 north.
  • I-75 195 Ohio Turnpike (195B) and SR 795 (195A), Rossford · Turnpike exit 64 lands here. I-75 north about 12 miles to exit 207.
  • I-75 197 Buck Rd · North Perrysburg and the Buck Rd industrial strip. About 11 miles to the shop.
  • I-80/90 Ohio Turnpike 64 I-75, Toledo / Dayton · Take I-75 north toward Toledo.
  • I-280 2 SR 795, Perrysburg / Walbridge · The east Perrysburg warehouse side. I-280 north to I-75, then I-75 south one exit to 207.
  • I-75 207 Stickney Ave / Lagrange St · Stickney Ave north about a mile, right on Matzinger Rd.

Map

820 Matzinger Rd, Toledo, OH 43612

A mile off I-75 exit 207 (Stickney Ave), north Toledo. Open in Google Maps

Perrysburg, OH and the shop at 820 Matzinger Rd

The truck is in Perrysburg. The bay is 13 miles north on one road.

Perrysburg sits at the busiest truck crossroads in northwest Ohio: I-75, the Ohio Turnpike at exit 64, US-20, US-23 and the I-475 split, all within a few miles of each other. That is good for freight and bad for a truck that has just thrown a code, because every one of those roads is full of drivers who want to be somewhere else.

The fix is 13 miles straight up I-75. Exit 207, Stickney Ave. A mile north, right on Matzinger Rd, and you are in the lot. Call ahead and the bay is already open.

Directions from Perrysburg to 820 Matzinger Rd

From downtown Perrysburg, take US-20 (Fremont Pike) to I-75 north at exit 193. From north Perrysburg and the Buck Rd industrial strip, get on at exit 197. From the Turnpike, exit 64 puts you on I-75 north at exit 195.

Stay on I-75 north through Rossford, across the Maumee River, past downtown Toledo and the I-475 junction at exit 204. Pass Jeep Parkway and Phillips Ave. Take exit 207, Stickney Ave / Lagrange St. Go north on Stickney Ave about a mile and turn right onto Matzinger Rd. The shop is just east of Stickney, on the same campus as Sam’s Travel Center and Sam’s Parking & Storage.

About 15 miles from downtown Perrysburg. About 20 minutes outside the rush. From exit 197 it is closer to 11 miles.

From the SR 795 warehouse side of Perrysburg, I-280 north to the end at I-75, then I-75 south one exit to 207, is about the same time.

What you get for the drive

  • Four technicians. ASE certified. Cummins certified. International certified.
  • Certified NAPA Truck Care Center. NAPA parts on the shelf, and the NAPA warranty network behind the repair.
  • A qualified DOT inspector for the 49 CFR 396.17 annual, with the repair done in the same bay.
  • Hunter HawkEye XL heavy-duty alignment. Steer tires on a Perrysburg to Chicago run wear out fast when the tandems are out of line.
  • CARB Clean Truck Check testing if any of your units go to California.
  • Class 4 through Class 8. Trucks and trailers. Engines, transmissions, brakes, air, electrical, AC, suspension, welding.

Same-day on many repairs, depending on parts. We tell you the plan before we start.

Mobile service to Perrysburg yards

The service truck covers Perrysburg, Rossford and the SR 795 warehouse strip during shop hours, Monday to Friday 8 to 5. Yard PM for small fleets. Mobile welding on a trailer that cannot roll. Air lines, lighting, landing gear and the other trailer work that does not need a bay.

Call before 2 PM for same-day dispatch in most cases.

Broken down near the Turnpike interchange

If the truck is failing on I-75 between exit 192 and exit 199, the shoulders are narrow and the traffic is fast. Get fully off the travel lane. Hazards on. Triangles at 10, 100 and 200 feet behind the trailer per 49 CFR 392.22. Then call (419) 724-2475.

During shop hours, emergency calls go to the front of the line. We dispatch the service truck or clear a bay. Tell us the exit, the direction and what the truck is doing.

Why Perrysburg fleets drive to north Toledo

Because the alternative is a dealer with a two-week backlog or a roadside truck that charges by the hour to tell you what we would have told you on the phone. Independent shop. Four techs. Google rating 4.7 from 40 reviews. You talk to the tech who did the work.

Call now

(419) 724-2475. Monday to Friday, 8 AM to 5 PM. Tell us you are coming up from Perrysburg and the bay will be clear when you pull in.

Questions drivers and fleet managers ask

Do you come out to Perrysburg?

Yes. The service truck runs to Perrysburg, Rossford and the SR 795 warehouse strip during shop hours, Monday to Friday 8 to 5. Yard PM, mobile welding and on-site repairs. Call first so the tech leaves with the right parts.

How far is the shop from downtown Perrysburg?

About 15 miles and about 20 minutes. I-75 north from exit 193 to exit 207 at Stickney Ave, then north on Stickney about a mile to Matzinger Rd.

I just came off the Turnpike at exit 64. How long to you?

About 13 miles, about 17 minutes. I-75 north from exit 195, past downtown Toledo, to exit 207. If the truck will not make it, pull into a lot and call. We dispatch during shop hours.

Can you do a DOT inspection and the alignment in one visit?

Yes. The 49 CFR 396.17 annual inspection takes about an hour and the Hunter HawkEye XL alignment is in the same building. Book both and the truck comes in once.

On the shoulder near Perrysburg?

Three fields. We call you.

Phone, where the truck is, what happened. Read as it lands during shop hours. Scheduled work? Use the 30-second form.

Read as it lands during shop hours, Mon–Fri 8:00 AM – 5:00 PM. If it can't wait, call (419) 724-2475.

Hours Mon–Fri 8–5
820 Matzinger Rd
Call (419) 724-2475